Process conditions of Busbar rolling machine
Rolling material: copper, aluminum
Feed thickness: 6 ~ 16mm
Feed width :360mm
Finished product thickness: 2.5mm
Main technical parameters of the Copper and Aluminum Busbar Rolling Machine:
1. Rolling speed :V≤60m/min;Rolling force: 300 tons
2. Two closed memorial archway (vertical column section size: 250×300mm) Material: ZG35
3. Press down motor: N=11KW 1 set;A spherical worm gear with a center distance of 315 is used for pressing.
4. Press down screw :160×6mm
5. Roll roller diameter*roller surface width 450 mm * 500 mm
material: 9 cr2mo
6. The bearings are FC5678275
7. Upper roll spring balance
8. Main motor: Z4-315-42 N = 315kW n =750/1600r/min (Xi shan motor)
9. Main speed reducer: ZSY500 (Tyrone)
10. Gear box: A=450mm
11. With universal joint shaft and bracket
12. Guide device and equipment foundation bolts
13. Equipped with a two-roller clamp and three-roller leveling mechanism, with a shovel plate inside the frame
Motor: Z4-200-31 N = 55kW N =1000/2000r/min (Xi shan motor)
Reducer: NGW type
14. Equipped with pressure gauge and roll seam gauge
Hydraulic four-pyramid coiler of Busbar Rolling Machine for CU and AL
2 sets (including 2 sets hydraulic unloading cars)
1. The drum size: 620 x 520 mm Ф (590 ~ 620 Ф Ф), increases and jaw
2. Motor: Z4-250-41 N=110KW n= 500/1100r/min (Xishan motor)
3 Speed reducer center distance: 750㎜