CNC Milling Machining - Manufacturers, Suppliers, Factory from China

CNC Milling Machining, , , ,. The product will supply to all over the world, such as Europe, America, Australia,, ,, .

Bus Bars and Transformers

Bus bars are an important component in the manufacture of transformers. They are a solid element that allows a flexible way of transmitting and distributing power. Busbars are produced in a variety...
How to detect the state of trace moisture in transformer oil

Transformer oil in the state of water, the transformer in the transportation, storage, use process may be entered by the outside or oil itself oxidation of water, the water generated will exist in...
The Equipment of Transformer Core Processing

The commonly used transformer core cutting equipment includes the slitting line and the core cutting line The slitting line is mainly used for the split of silicon steel sheet in transformer, motor...
Technical Analysis | Dry Type Transformer Partial Discharge Causes and Control Measures

I.Cause of Partial Discharge The transformer insulator, metal body and so on are often with some sharp angle and burr, so the electric charges under the action of electric field intensity will conc...
Winding of foil coils

Foil coil is mainly used for small and medium-sized transformers with capacity less than 2000KVA. The advantages of foil coil are: good mechanical strength, not easy to deformation, can withstand s...
Successfully installed two wrapping machines in Mexico

Trihope has successfully install and commissioned two paper-wrapped insulated wire auto wrapping machines in one of the largest cable factories in Mexico. Paper wrapped round & rectangular wire...

CNC Milling Machining