Process conditions of Busbar rolling machine

Rolling material: copper, aluminum

Feed thickness: 6 ~ 16mm

Feed width :360mm

Finished product thickness: 2.5mm

Main technical parameters of the Copper and Aluminum Busbar Rolling Machine:

1. Rolling speed :V≤60m/min;Rolling force: 300 tons

2. Two closed memorial archway (vertical column section size: 250×300mm) Material: ZG35

3. Press down motor: N=11KW 1 set;A spherical worm gear with a center distance of 315 is used for pressing.

4. Press down screw :160×6mm

5. Roll roller diameter*roller surface width 450 mm * 500 mm  

material: 9 cr2mo

6. The bearings are FC5678275

7. Upper roll spring balance

8. Main motor: Z4-315-42    N = 315kW   n =750/1600r/min (Xi shan motor)

9. Main speed reducer: ZSY500 (Tyrone)

10. Gear box: A=450mm

11. With universal joint shaft and bracket

12. Guide device and equipment foundation bolts

13. Equipped with a two-roller clamp and three-roller leveling mechanism, with a shovel plate inside the frame

Motor: Z4-200-31 N = 55kW N =1000/2000r/min (Xi shan motor)

Reducer: NGW type

14. Equipped with pressure gauge and roll seam gauge

Hydraulic four-pyramid coiler of Busbar Rolling Machine for CU and AL

2 sets (including 2 sets hydraulic unloading cars)

1. The drum size: 620 x 520 mm Ф (590 ~ 620 Ф Ф), increases and jaw

2. Motor: Z4-250-41  N=110KW   n= 500/1100r/min (Xishan motor)

3 Speed reducer center distance: 750㎜