+8613505407298
trihope@aliyun.com
-
Transformer Amorphous core annealing furnace
Amorphous iron core annealing furnace is mainly used for annealing process for amorphous iron core in the manufacturing process. -
Automatic Transformer Toroidal Core Winding Machine
The automatic toroidal core winder for producing of toroidal core made from grain oriented steel or non-oriented steel for small transformers, transmitters, instrument and voltage transformers, chokes and variable voltage transformers. The machine with the highest quality components and materials, and through the application of an advanced design, very significant economies are provided in low running costs, high speed operation and low maintenance. -
Transformer Amorphous Core Cut to Length Line
The Amorphous Core Cut to Length Line is mainly used for the automatic cut to length of amorphore core. Also applies to similar technology processing requirements. -
Transformer Amorphous Shearing Line
The amorphous core cut to length machine is mainly used for the automatic cut to length of amorphore core. Also applies to similar technology processing requirements. -
Silicon steel V Notching Cutting Machine for Transformer V Cutting Machine Line Cut Line
VY Series Notching Machine for Transformer "V" Cutting
The V notching machine is a special equipment for cutting V-shaped mouth of silicon steel sheet transformer core yoke. For example, one edge of V-shaped cutting machine can also be used to cut side column piece and middle column piece. -
CCA Plat Form Transformer Body Assembly Frame
Transformer Body Assembly Frame meets the special equipment of 220kV transformer body assembly frame. -
80 Ton Transformer Core Stacking and Tilting Table
FT80T core overturning table equipment and standard accessories are used for overlaying and overturning of three-column and five-column cores of 80T transformers. -
overturning table equipment for Transformer silicon core
core stacking and tilting platform and standard accessories are used for overlaying and overturning of three-column and five-column cores of 80T transformers. -
Power transformer moveable automatic trolley core tilting core stacking line
Core Stacking Line is the automatic auxiliary equipment for core lamination process, Consist of Roller Table, Core Stacking table, Trolley, and Tilting table. This Stacking Line is to replace the original laminated platform and Crane requirements, At the same time, the negative effect of core tilting on core performance after stacking is solved. When stacking, the stacking table shall be placed on the working roller, and the position of the support column on the stacking table shall be adjusted according to the required size. After stacking, the stacking table shall be transported to the trolley and from the trolley to the tilting station to complete the tilting operation. -
Iron Transformer Core molding machine
Core molding machine is used for pressing molding and die-filling of rolled core on assembly line. The rolled round core is pressed to be in specified size by the equipment. The matched core die are pressed into the inside of iron core appropriately.
